Materials - Group of multibusiness companies DONROAD

Поиск
Go to content

Main menu:

Materials

At the moment LLC «DONROAD» is presented in the market by the following brands of materials:

All materials are certified and produced by the group of companies.

Thermo-spray-plastic «Magistral Plast» SP is designed for the professional application and renovation of road marking on the cement concrete and asphaltic concrete pavement. Thermo-spray-plastic «Magistral Plast» SP represents the powder blend consisting of thermoplastic resin, mineral filler, adhesive additives, plasticizers and pigment.
Types of the application

  • North

  • South

  • Standard

Technical specification

  • Density (of formed material) – 2,1±0,1 t/m3

  • Ring-and-ball softening point –  +91˚С

  • Brittleness temperature –  at least equal to +8˚С

  • Working temperature of manufacturing - +195±5˚С

  • Adhesive strength– no less than 30 kgf/cm2

  • Thickness of coating applied – 0,6-2 mm

  • Immunity to alternating vibration – no less than 20000 cycles

  • Water saturation – 0,1 %

  • Hardening time – 8 min

Certificate:

  • ISO 9001

  • CE

  • All-Union State Standard R

Back to top

Bitumen-polymer mastic «Polymer Mast» is used for professional application during the construction, repair and maintenance of the road pavement. Bitumen-polymer mastic «Polymer Mast» is produced in three types depending on the frost-resistance (МBP-25, МBP-35, МBP-50), and is meant for the hermetization of the expansion joints, for the filling-in of the fractures in the cement concrete and asphaltic concrete pavement in the different climatic regions.
Mastic «Polymer Mast» represents a uniform mixture, derived from the bitumen, modificative polymer additives, plasticizer and different technological fillers.
Types of the application

  • South, the frost-resistance – 25 ˚С

  • Standard, the frost-resistance – 35 ˚С

  • North, the frost-resistance – 50 ˚С

Technical specification

  • density of formed material – 1,35±0,1 t/m3

  • ring-and-ball softening point- +80 ±3˚С

  • working temperature of manufacturing - +175±5˚С

  • adhesive strength– no less than 1,5 kgf/cm2

  • cohesive strength – no less than 0,8 kgf /сm2

  • immunity to alternating vibration – no less than 30000 cycles

  • water saturation – at least equal to 0,5 %

  • ultimate elongation at the moment of abruption at +20˚С –  no less than 350%

  • ultimate elongation at the moment of abruption at -20˚С –  no less than 75%

  • package – carton boxes 20-25 kg with plastic insert providing water resistance

  • deterioration affected by the UV radiation – no less than 1000 hours

Certificate:

  • ISO 9001

  • CE

  • All-Union State Standard R

Back to top

Glass beads «Spherastek» are designed to provide excellent night visibility of the road marking. Glass beads «Spherastek» represent spherical granules of glass and dry material of white color in the mass (light grey and light blue colors are also admitted). Glass beads are made of broken colorless half-white soda-lime silica glass.
Size distribution, microns:

  • 0-70

  • 50-150

  • 63-212

  • 125-600

  • 200-600

  • 400-850

  • 180-850

  • 180-1000

  • 700-1100

  • Other sizes

Types of coating

  • NEW! ultraviolet  

  • No coating

  • Adhesion

  • Waterproof

  • Complex coating

Technical specification

  • Glass refractive index – no less then 1,5

  • Roundness

  • Density

  • Package - bags weighting 25 kilograms or big-bags weighting 500 and 1000 kilograms

Certificate:

  • ISO 9001

  • CE

  • All-Union State Standard R

Back to top

Two-component cold plastic «Magistral Plast» HP is designed only for the professional application of road marking on the cement concrete and asphaltic concrete pavements. Two-component cold plastic «Magistral Plast» HP is white viscous thixotropic liquid with the characteristic etheric odor. Two-component cold plastic «Magistral Plast» HP represents the dispersion of coarse fine fillers, pigments, processing aids in mixed esters of metacrylic / acrylic acid (n-butyl acrylate, methyl metacrylate). The dibenzoyl peroxide in phthalate is the hardener (polymerization initiation) and represents the white powder.
Types of the color

  • White

  • Yellow

  • Red

  • Other colors

Technical specification

  • Flowability at the temperature 20˚С – 4-10 mm

  • Life time at the temperature 20˚С after the injection of 1-1,5 % hardener – 8-12 min

  • Time of the complete polymerization at the temperature 20˚С after the injection of 1 % hardener – 20-25 min

  • Dry residue – 98%

  • brightness coefficient (diffuse reflection) after the polymerization – 80-86%

  • physical form after the polymerization – the flat white non-manifold surface without cracks and delamination

  • package – the hobbock (20 l) with 25 kg of material

  • Density – 2,0-2,1 g/cm3

  • Material Take-Off with the thickness 2-3 mm – 3,7-6,0 kg/m2 on the sheet pavement

Certificate:

  • ISO 9001

  • CE

  • All-Union State Standard R

Back to top

Thermoplastic «Magistral Plast T» is designed for the professional application of road marking on the cement concrete and asphaltic concrete pavement. Thermoplastic «Magistral Plast T» represents the powder blend consisting of thermoplastic resin, mineral filler, plasticizers and pigment.
Types of the application

  • North

  • South

  • Standard

  • City

Technical specification

  • Density (of formed material) – 2,05±0,1 t/m3

  • ring-and-ball softening point –  +92˚С

  • brittleness temperature –  at least equal to +5˚С

  • working temperature of manufacturing - +185±5˚С

  • adhesive strength– no less than 30 kgf/cm2

  • thickness of coating applied – 2-5 mm

  • immunity to alternating vibration – no less than 20000 cycles

  • water saturation – 0,1 %

  • hardening time – 15 min

Certificate

  • ISO 9001

  • CE

  • All-Union State Standard R

Back to top

 
Back to content | Back to main menu